Strategy Series II
FAP40T | FAP42T | FAP62T | FAP82T | FAPSUB | Strategy Series Construction Rings

8" Loudspeaker Drivers
SD72 | SD72W | SD72WV | GD87 | GD87W

8" and 12" Compression Driver Coaxial Speakers
8CXT60 | 12CX and 12CXT60

12" Coaxial Loudspeaker with Transformer
C12BT60

MTX In-Walls and In-Ceiling Speakers
CD520W | CD620W | HT625W| HT825W | CD520C | CD620C | Hole Providers for MTX Audio Loudspeakers

Recessed Accessories

Features of the Atlas Sound FAP40T:
• Tap selector switch located behind speaker magnet with shaft through center of cone. Selector knob doubles as dispersion cone and allows tap selection to be done after speaker is installed in the ceiling • Lightweight construction makes additional support in dry-wall ceilings unnecessary • Perfect companion with the FASUB70 subwoofer system when sub bass is required • Press-fit grille blends perfectly into contemporary architecture • Tuned & ported design for extended bass response • Low profile plastic enclosure (UL1480 pending) • 16 Watt internal transformer • 8 ohm transformer bypass setting • Barrier strip connection • Tile bridge included

Top of Page

Features of the Atlas Sound FAP42T:
• Extended low frequency response from the 285 cubic inch optimally tuned and ported deep drawn galvanized steel enclosure • Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg" mounting system (Included) • Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 8 ohm direct coupled operation • Unique "trap door" input section allows for through conduit runs with rigid or flex conduit • 4 Pole detachable "phoenix" style connector allows easy pre-wiring and is convenient for daisy chaining additional Strategy full range speakers or subwoofers • "Press fit" grilles blend better into contemporary architecture • Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintain low frequency response while providing increased output for higher SPL applications • UL Listing Pending

Top of Page

Features of the Atlas Sound FAP62T:
• Extended low frequency response from the 475 cubic inch optimally tuned and ported deep drawn galvanized steel enclosure • Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg" mounting system (Included) • Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 8 ohm direct coupled operation • Unique "trap door" input section allows for through conduit runs with rigid or flex conduit • 4 Pole detachable "phoenix" style connector allows easy pre-wiring and is convenient for daisy chaining additional Strategy full range speakers or subwoofers • "Press fit" grilles blend better into contemporary architecture • Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintain low frequency response while providing increased output for higher SPL applications • UL Listing Pending

Top of Page

Features of the Atlas Sound FAP82T:
• Extended low frequency response from the optimally tuned and ported deep drawn galvanized steel enclosure. (933 cubic inches) • Front mounted tap selector switch for easy system tuning adjustments (1.9W to 60W @ 70.7V plus 8 ohm setting) • Unique “trap door” input section allows for through con-duit runs with rigid or flex conduit • 4 Pole detachable “phoenix” style connector allows easy pre-wiring and is convenient for daisy chaining additional Strategy full range speakers or subwoofers • “Press fit” grille to better blend into contemporary architecture. • Ships complete with speaker/transformer factory assembled into back can, grille and unique C-Ring/V-Rail Mounting System hardware • May be pendulum mounted via top mounted eyebolt (included). Enclosure is also finished in white for optimum aesthetics when hung in open ceiling applications

Top of Page

Features of the Atlas Sound FAPSUB:
• Tuned & ported, long excursion 8" subwoofer system produces amazing extended low frequency response in any ceiling speaker system • High efficiency, passive crossover network eliminates the need for dedicated amplifier and/or active crossover • Low crossover point greatly reduces localization (ability of listener to identify the subwoofer location) • Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 4 ohm direct coupled operation • Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and “dog leg” mounting system (included) • Uniquely designed, “easy access” input panel design allows for "thru" conduit runs using flexible or rigid conduit • Detachable, Phoenix style, locking, four-pole connector provides for easy daisy chain wiring • Attractive stud mount grille matches aesthetics of other Atlas Sound FA Series • UL listing pending

Top of Page

Top of Page

Features of the Atlas Sound SD72:
• 10oz dual cone speaker provides familiar response & performance • Quality 5 watt-dual voltage transformer • Individually packaged for stocking & ordering convenience

Top of Page

Features of the Atlas Sound SD72W:
• 10oz dual cone speaker provides familiar response & performance • Quality 5 watt-dual voltage transformer • Attractive CRS white powder coat baffle • Individually packaged for stocking & ordering convenience

Top of Page

Features of the Atlas Sound SD72WV:
• 10oz speaker provides familiar response & performance • Quality 5 watt-dual voltage transformer • Attractive CRS white powder coat baffle with center mounted volume control • Control loudspeaker volume in individual office and zone areas • Incorporate or remove volume control knob to suit application requirements • Individually packaged for stocking & ordering convenience

Top of Page

Features of the Atlas Sound GD87:
• Industry standard 8" (203mm) coaxial, 16 watt, loudspeaker with high quality factory installed 8 watt line matching transformer • Offers proven performance with wide frequency response • Post-mounted tweeter adds strength and a more attractive appearance • Ideal for multi-purpose commercial, industrial and institutional use • Individually packaged for stocking & ordering convenience

Top of Page

Features of the Atlas Sound GD87W:
• Industry standard 8" (203mm) coaxial, 16 watt, loudspeaker with high quality factory installed 8 watt line matching transformer and white CRS baffle • Offers proven performance with wide frequency response • Post-mounted tweeter adds strength and a more attractive appearance • Ideal for multi-purpose commercial, industrial, and institutionals use • Individually packaged for stocking & ordering convenience

Top of Page

Features of the Atlas Sound 8CXT60:
• 1" Exit compression high frequency driver coupled to a specially designed conical wave-guide horn provides exceptional output & accurate high frequency reproduction • High efficiency cone woofer is optimally matched with a specially designed crossover to insure even transition between components • 90 Degree conical dispersion (@ 2000 Hz) • Includes factory installed, 60W, 70.7/100V transformer • Perfectly suited for use with Atlas Sound "Q" Series enclosures

Top of Page

Features of the Atlas Sound 12CXT60:
• 1" Exit compression high frequency driver coupled to a specially designed conical wave-guide horn provides exceptional output & accurate high frequency reproduction • High efficiency cone woofer is optimally matched with a specially designed crossover to insure even transition between components • 90 Degree conical dispersion (@ 2 kHz) • Available with factory installed, 60W, 70.7/100V transformer (CX12T60) • Perfectly suited for use with Atlas Sound "Q" Series enclosures

Top of Page

C12BT60

Features of the Atlas Sound C12BT60:
• Factory-installed, 60W line-matching transformer to match 70.7V or 100V lines (transformer may also be easily bypassed for 8 Ohm applications) • Heavy duty cast basket for added strength in high power applications • Newly designed post mounted 1" tweeter section with unique mounting plate that maximizes the tweeters frequency response by reducing phase cancellation. • Greatly improved frequency response compared to our previous C12A or C123 models. • Accurate midrange reproduction and overall voicing is very pleasing for voice or music reproduction. • 90 degree dispersion at 2kHz

Top of Page

Features of the Atlas Sound/MTX CD520W:
Woofer 5 1/4" Poly Tweeter 1/2" Dome, Frequency Response 53Hz-20kHz, Impedance 8 Ohms, Power (RMS) 45 Watts, Total Power 140 Watts, Sensitivity 84 dB 1w/1m, Mounting Depth 2 1/2", Cutout Size 9-1/2"H X 6-1/16"W, Maximum Wall Thickness -  2 5/16"

Top of Page

Features of the Atlas Sound/MTX CD620W:
Woofer 6 1/2", Poly Tweeter 1/2" Dome, Frequency Response 43Hz-20kHz, Impedance 8 Ohms, Power (RMS) 50 Watts, Total Power 160 Watts, Sensitivity 85 dB 1w/1m, Mounting Depth 3", Cutout Size 10-5/8"H X 7-1/4"W, Maximum Wall Thickness 2 5/16"

Top of Page

Features of the Atlas Sound/MTX HT625W:
These in-wall speakers reproduce even the most demanding music. The soft swivel dome tweeter construction uses a neodymium magnet. The polypropylene woofer cone with butyl rubber surround is lightweight and rigid to accurately reproduce extremely low frequencies. IR (infrared) knockout is also provided for use with the Atlas Sound M-1A repeater.

Top of Page

Features of the Atlas Sound/MTX HT825W:
These in-wall speakers reproduce even the most demanding music. The soft swivel dome tweeter construction uses a neodymium magnet. The polypropylene woofer cone with butyl rubber surround is lightweight and rigid to accurately reproduce extremely low frequencies. IR (infrared) knockout is also provided for use with the Atlas Sound M-1A repeater.

Top of Page

Features of the Atlas Sound/MTX CD520C:
Woofer 5-1/4", Tweeter 1/2" Balanced dome, Frequency Response 72Hz-20kHz ±3dB, Impedance 8 Ohms, Power (RMS) 30 Watts, Total Power 60 Watts, Sensitivity 85 dB @ 1w/1m, Mounting Depth 3-5/16", Cutout Size 6-1/2" DIA.  Maximum Wall Thickness 1-1/2"

Top of Page

Features of the Atlas Sound/MTX CD620C:
Woofer 6-1/2", Tweeter ½" Balanced dome, Frequency Response 50Hz-20kHz ±3dB, Impedance 8 Ohms, Power (RMS) 35 Watts, Total Power 70 Watts, Sensitivity 85 dB @ 1w/1m, Mounting Depth 3-1/8", Cutout Size 7-11/16" DIA.  Maximum Wall Thickness 7/8"

Top of Page

Top of Page

Nearest Related Menu  |  Other ATLAS SOUND pages  |  Sales Home Page

Top of Page