BELTPACKS, HEADSET STATIONS, HANDSETS AND HEADSETS

PORTABLE HEADSET STATIONS (BELTPACKS)
BP-1
	The BP-1 portable headset station may be worn on the belt or hung on the wall by its sturdy belt-clip.  Soft plastic strips on the underside help hold it in place when set on top of a console.  The matte black finish minimizes visibility.  Frequency response has been carefully shaped to optimize both intelligibility and long-term listening comfort.  A microphone limiter circuit reduces overload distortion.  The high bridging impedance ensures that system and sidetone levels do not vary as other stations are switched in and out of the circuit.  The top panel contains controls for switching the microphone on and off, for controlling listening level, and for signaling.  They are easily identifiable by touch.  A recessed, screwdriver-adjust control is provided for varying the level of the user’s voice to be heard in his own earphone (Sidetone).  A long-life, extremely bright, 4-segment LED serves as the signal light.
Model Description List Price Our Price BP1 Beltpack, Single Circuit $220.00 BP1E Beltpack, Single Circuit, Electret Microphone Circuit $229.00 Top of Page
BP.15
	1/7th (0.15) the size of the BP-1 (by volume). All the functions of a full-sized belt pack are retained, the signal button and the mic. On/Off but on are shaped differently for easy recognition by touch, in the dark. Two LEDs are mounted, one to indicate signaling (red, bright) and one (green, low output) to indicate that the microphone is On.  The BP.15 is available with an optional vibrator in addition to the standard signal LED.  The volume control is a thumbwheel, again reducing the likelihood of accidental damage.
Model Description List Price Our Price BP15 Beltpack, Single Circuit, Miniature $246.00 Top of Page
BP-1S/L
	The BP-1S/L replaces the BP-1S.  It is a single circuit belt pack with a front panel switch permitting communication with circuit “A” or Circuit “B”, but not both.  The improvement is the addition of a second signal light.  Now signals on the unselected circuit are monitored as well as those on the selected circuit.  Each of the 3-pin XLR connectors on the rear panel is used for connection to a separate circuit.  Therefore, loop-through requires the use of a pair of Y-cables or a pair of SB-1 Splitter/Isolator boxes.
Model Description List Price Our Price BP1SL Beltpack, 2-Circuit, Switchable A or B, Signal on Both $280.00 Top of Page
BP-2 AND BP-2B
	The BP-2 or BP-2B portable headset station may be worn on the belt or hung on the wall by its sturdy belt-clip. Soft plastic strips on the underside help hold it in place when set on top of a console.  The matte black finish minimizes visibility.  Both are true 2-circuit units, permitting the user to talk and/or listen to either or both circuits simultaneously.  Separate controls are provided for each circuit. The BP-2 mixes the incoming audio from both circuits to one earspeaker of a single-muff headset or both earspeakers of a dual-muff headset (4-pin headset connector).  The BP-2B supplies separate audio from each circuit to each earspeaker of a dual-muff headset (5-pin headset connector).  Binaural.
Model Description List Price Our Price BP2 Beltpack, 2-Circuit, Independent Control of Each $331.00 BP2B Beltpack, 2-Circuit, Binaural Headset Feed $365.00 Top of Page
FIXED HEADSET STATIONS
HS-1 AND HS-2
	The HS-1 headset stations provide the same facilities as our BP-1 portable headset stations in a format suitable for flush mounting. The HS-1M differs from the HS-1 by the inclusion of a rotary switch which permits the station to be connected to any one of nine different communications circuits.  Frequency response has been carefully shaped to optimize both intelligibility and long-term listening comfort.  A microphone limiter circuit reduces overload distortion.  The high bridging impedance ensures that system and sidetone levels do not vary as other stations are switched in and out of the circuit. The front panel contains controls for switching the microphone on and off, for controlling listening level, and for signaling.  The signal light button also serves as the signal light.  The HS -1M also has a rotary switch for selecting a circuit.  This switch is factory set to a maximum of four positions, but may be expanded to nine.  A recessed, screwdriver-adjust control is provided for varying the level of the user’s voice to be heard in his own earphone (sidetone).  Connection to an HS-1 or HS-1M is via a locking terminal strip on the edge of the circuit card.  The HS-1 and HS-1M may be mounted on a 3-gang masonry type electrical box.
Model Description List Price Our Price HS1 Fixed Headset Station, Flat Plate for Surface Mounting. Fits 3-Gang Masonry Box $246.00 HS1M Multi-Circuit Version of HS-1.  Selector allows choosing one from as many as four connections $271.00 HS1R Rack-Mount Version of HS-1, 2RU High $322.00 HS1RL Rack-Mount Version of HS-1 with Integrated Blazon Strobe Light $426.00 HS1MR Rack-Mount Version of HS-1 with Multi-Circuit Function $348.00 HS1MRL Rack-Mount Version of HS-1 with Multi-Circuit Function, and Integrated Blazon Strobe Light $452.00 HS1T Desktop or Wall Mount HS-1.  Sloped Metal Cabinet, Rubber Feet and Keyhole Mounting Slots $305.00 HS1TL Desktop or Wall Mount HS-1 with Integrated Blazon Strobe Signal Light $427.00 HS1MT Desktop or Wall Mount HS-1 with Multi-Circuit Function $342.00 HS1MTL Desktop or Wall Mount HS-1 with Multi-Circuit Function with Integrated Blazon Strobe Signal Light $327.00 HS2P Fixed Headset Station, Flush Mount Single-Circuit, Fits 2-Gang Electrical Box or Console $280.00 HS2M Multi-Circuit Version of HS-2, Four Selectable Circuits $305.00 HS2RL Rack-Mount Version of HS-2 with Xenon Strobe.  Single Rack Unit High $381.00 Top of Page
LOUDSPEAKER STATIONS
LS-2 SERIES
	The LS-2 Listening Station is a receive-only component intended to provide paging functions to your Production Intercom system without having to install a separate paging amplifier and speakers. It contains its own amplifier and speaker and is powered from the intercom power supply. Typical applications would include dressing rooms, green rooms and box offices. When mounted in its extremely rugged metal back box, it connects to the intercom system through a three-pin XLR just like any other station. The box can be used ‘tabletop’ or mounted on the wall using rear panel key-shaped holes. When flush mounted in a 6-gang electrical box, connection is via a plug-in terminal strip. The plug-in strip for the wire end is provided. The LS-2 has an override feature that permits the operator of any station equipped with the OG904 Override generator module to switch the LS-2 to its preset override status, either raising or lowering the volume. The station with the override generator is typically a master or sub-master station but one can also be installed in a BP-1 Beltpack, an HS-1 Headset Station or an LS-3 Talk back Loud-speaker Station.
Model Description List Price Our Price LS2 Intercom Listening System, Listen Only with Override Activation, Flush-Mount $178.00 LS2T Intercom Listening System, Listen Only with Override Activation, Wall-Mount or Desktop $299.00 Top of Page
LS-3 SERIES
	LS-3 series Talkback Loudspeaker Stations operate in three different modes: 1) Press-to-talk/release-to-listen, using the loudspeaker as both microphone and speaker; 2) Simultaneous talk and listen [full duplex] when an LSM-1 gooseneck microphone is plugged into the front panel, and; 3) As a headset or handset station when either is plugged into the front panel XLR.  Modes 2 and 3 are invoked automatically when the unit senses the presence of the microphone, headset, or handset. No switching is required.
Model Description List Price Our Price LS3 Talkback Loudspeaker Station, Flush-Mount, Single Circuit $306.00 LS3M Talkback Loudspeaker Station, Flush-Mount, Multi-Circuit $380.00 LS3R Talkback Loudspeaker Station, Rack-Mount, Single Circuit $477.00 LS3MR Talkback Loudspeaker Station, Rack-Mount, Multi-Circuit $509.00 LS3T Talkback Loudspeaker Station, Desktop or Wall-Mount, Single Circuit $444.00 LS3MT Talkback Loudspeaker Station, Desktop or Wall-Mount, Multi-Circuit $488.00 Top of Page
HANDSETS
HH10/A AND HH10/B
	These U.S. made handsets are identical to those used on coin telephones, with transducers suitable for intercom use. To help prevent feedback between the earspeaker and microphone, an airtight sound barrier is applied to the otherwise hollow handset at both ends. As a result the operator can use extremely high levels before feedback.   The HH10/A consists of the handset with push-to-talk switch, equipped with a coil cord and 4-pin XLR connector, and a wall mount cradle with retaining spring-clip. The HH10/B consists of the same handset, coil cord and cradle, but the coil cord is wired to the cradle which, in this model, contains a hook-switch to mute the earspeaker when the handset is “hung up”.  A ten foot cable is wired to the HH10/B cradle, with a 4-pin XLR connector for connection to an intercom station.
Model Description List Price Our Price HH10A Handset with Passive Cradle, Coil Cord, Neutrik 4-Pin XLR, PTT Switch in Handle $138.00 HH10B Handset with Active Cradle, Coil Cord to Cradle, 10 ft. Straight Cord from Cradle to Input, XLR $165.00 Top of Page
HEADSETS
200 SERIES HEADSETS
	Exceptionally high quality transducers provide wide smooth frequency response, reducing the onset of ‘ear fatigue’ for those who must spend many hours wearing headsets.  Deep, comfortable ear cushions have excellent external noise exclusion characteristics, and are washable with ordinary dish washing detergent.  At 7.35 oz. the SMH210, and at 8.75oz the DMH220, are much lighter than their appearances suggest.  The noise-canceling microphone is mounted on a flexible, steel reinforced boom which can be easily twisted into a comfortable position.  The flexible headband is adjustable.  The normal transducer configuration for use with Production Intercom and compatible headset intercom systems are 400 ohm earspeakers and a 200 ohm dynamic microphone.  Electret microphones and lower impedance earspeakers for other applications are also available, and combinations of these transducers make up the various models.  For use with Production Intercom and most headset communications systems the SMH210 and DMH220 are fitted with a 4-pin female XLR-type plug.  For other applications many different plugs are available.
Model Description List Price Our Price SMH210 Single-Muff Headset, 400 Ohm Earspeaker, 200 Ohm Dynamic Mic, Neutrik 4-Pin XLR $155.00 SMH211 Single-Muff Headset, 40 Ohm Earspeaker, 200 Ohm Dynamic Mic, Neutrik 4-Pin XLR $182.00 SMH212 Single-Muff Headset, 40 Ohm Earspeaker, 2.2k Ohm Electret Mic, Neutrik 4-Pin XLR $182.00 SMH213 Single-Muff Headset, 400 Ohm Earspeaker, 2.2k Ohm Electret Mic, Neutrik 4-Pin XLR $155.00 DMH220 Dual-Muff Headset, 2x400 Ohm Earspeakers, 200 Ohm Dynamic Mic, Neutrik 4-Pin XLR $186.00 DMH220USB Dual-Muff Headset, 2x40 Ohm Earspeakers, 2.2K Electret Mic, Neutrik 4-Pin XLR $397.00 DMH222 Dual-Muff Headset, 2x400 Ohm Earspeakers, 2.2k Ohm Electret Mic, Neutrik 4-Pin XLR $186.00 DMH224 Dual-Muff Headset, 2x40 Ohm Earspeakers, 2.2k Ohm Electret Mic, Neutrik 4-Pin XLR $229.00 Top of Page
300 SERIES HEADSETS
	These light, comfortable headsets are equipped with high quality transducers for smooth response and pleasant listening.  The soft, textured muffs are removable and washable.  The mechanism for adjusting size allows for a wide range and is both simple and sturdy.  The microphone is mounted on a thin flexible gooseneck boom which also swivels at the ear cup and can be swung up and out of the way.  This boom also allows the microphone to be adjusted very close to the mouth for situations where quiet or discrete communications are important.  The thin, flexible cable does not tug on the headset and may be clipped out of the way with our optional clothing clip.  The SMH310 and DMH320 are plug-in compatible with Clear-Com® and most other popular headset communications systems.
Model Description List Price Our Price SMH310 Single-Muff Headset, 400 Ohm Earspeaker, 200 Ohm Dynamic Mic, Gamma 4-Pin XLR $85.00 DMH320 Dual-Muff Headset, 2x400 Ohm Earspeaker, 200 Ohm Dynamic Mic, Gamma 4-Pin XLR $105.00 Top of Page
600 SERIES HEADSETS
	The SMH610 can be worn with a hard hat, helmet or other protective headgear.  Once the headset is in place, the earspeaker can be flipped in or out, close to the ear or away, and the thin flexible boom can be adjusted to place the microphone in the right position. A flexible band allows the user to make the headband snug, and accommodates a wide range of head sizes. The microphone on the SMH610 is unidirectional dynamic type with a frequency response tapered to reproduce speech clearly. The earspeaker is capable of reproducing very high sound levels, though low frequency response is attenuated.
Model Description List Price Our Price SMH610 Single-Muff Behind the Head Headset, 600 Ohm Dynamic Mic, Neutrik 4-Pin XLR, Push to Mute Switch $169.00 Top of Page
700 SERIES HEADSETS
	The SMH710 is a light weight version of the SMH310. The construction, though smaller, is very similar. At 3.88 oz. (0.11kg) it is among the lightest headsets suitable for intercom that is available, and far more comfortable than the most commonly available light weights. Because it has a dynamic microphone, it is suitable for all intercom stations, old and new. The microphone arm is a flexible gooseneck and has a swivel mount, permitting a wide range of positioning. The headset comes with a foam microphone pop filter The SMH710 is for left side use only.
Model Description List Price Our Price SMH710 Light Weight Single-Muff Headset, 200 Ohm Dynamic Mic, Neutrik 4-Pin XLR $69.00 Top of Page
900 SERIES HEADSETS
	Exceptionally high quality transducers provide wide, smooth frequency response, reducing the onset of ear fatigue for those who must spend many hours wearing headsets.  Deep, comfortable ear cushions have excellent external noise exclusion characteristics, and are washable with ordinary dish washing detergent.  At 10.8oz (.306kg), including the cable and XLR, the SMH910 is much lighter than its appearance suggests.  Even the dual-muff version, DMH920, weighs in at only 15.3oz ( .435kg). The noise-canceling microphone is mounted on a flexible, steel reinforced boom which can be bent for optimum positioning.  The boom swings up out of the way when required and shuts the microphone off at the top of the swing.  The boom can be reversed for use on the right side.  The flexible head band is adjustable.  The normal transducer configuration for use with Production Intercom and compatible headset intercom systems is 400 ohm earspeaker(s) and a 200 ohm dynamic microphone
Model Description List Price Our Price SMH910 Single-Muff Headset, 400 Ohm Earspeaker, 200 Ohm Dynamic Mic, Neutrik 4-Pin XLR $331.00 DMH920 Dual-Muff Headset, 2x400 Ohm Earspeaker, 200 Ohm Dynamic Mic, Neutrik 4-Pin XLR $425.00 Top of Page
9000 SERIES HEADSETS
	The DMH9000, with its low visual profile, was specifically designed with broadcast and studio applications in mind.  Special attention has been given to acoustical and electrical isolation of the microphone from the earspeakers to minimize the incidence of cross-talk.  The symmetrical hypercardioid studio quality condenser microphone was expressly developed for near-field use and combines excellent noise rejecting abilities with a wide, smooth frequency response.  The near-field characteristics of the microphone capsule provide good noise rejection without having it so close to the mouth as to obscure the wearers face.  The microphone is balanced and requires phantom power 12~48V.  The microphone boom can be positioned on the left or right side and swings up and out of the way past a series of detents. As the boom is raised a gold plated micro switch turns the microphone noiselessly off. The earspeakers have a specially contoured and wide bandwidth in combination with high sensitivity.  The DMH9000 can be fitted with cable and plugs for almost any professional application including broadcast, audio console, recording console and computer.
Model Description List Price Our Price DMH9000 Dual-Muff Headset, 2x400 Ohm Earspeakers, 600 Ohm Hypercardioid (nearfield) Broadcast Quality Condenser Mic, Priced Unterminated $478.00 Top of Page
DMH948ACS HEADSET
	Features of the Production Intercom DMH948ACS: • The DMH 948 ACS headset begins with the proven and time-tested construction of our DMH920 communications headset. From that headset the DMH 948 ACS inherits its durability, lightweight comfort, concealed wiring, adjustable head bow, and trimness of design • In all other ways the 948 has been designed from scratch for broadcast applications • Rather than being tailored for speech clarity, the ear speakers have wide, pleasing, music quality frequency response • The muffs are deep and covered with a plush material for superior comfort. (A supply of washable/disposable covers is included.) • The newly engineered microphone boom is a flexible gooseneck that is adjustable over a wide range of positions, and which is damped to drastically reduce noise • The microphone is mounted on the end of the boom using an elastic spider-like suspension; a miniature version of those used on large, studio quality condenser microphones. The interchangeable microphone capsules are electrically connected via a trim but secure threaded fitting. Once connected, the capsule is pressed firmly into the elastic suspension. A miniature pop filter is then slid onto the end of the capsule • Four, true-condenser microphone capsules are available: omni-directional; cardioid; cardioid with low frequency roll-off; and hyper-cardioid. Typical frequency response curves are provided on page four. These are not electrets, they are true studio-quality condenser microphones. Your microphone's serial number and frequency curve will be stored. If it ever needs replacing, a unit with a frequency response curve as close as possible to it will be made available • A fully shielded microphone preamplifier, of a quality to match the microphones, is securely mounted and protected inside the ear cup • The cable is soft and flexible, with a molded splitter leading to lengths of the microphone side and the earspeaker side cables long enough to accommodate any mixer • The connectors have metal shells and gold plated contacts.
Model Description List Price Our Price DMH948ACS The Ultimate Broadcast/Voice-Over Headset.  Choice of 4 True Condenser Mic Patterns (Sold Separately) $2,415.00
Nearest Product Category  |  Other PRODUCTION INTERCOM Pages  |  Sales Home Page Top of Page