Fog Machines
Alpha 900 | Model 1700 | Model 1900 | Delta 3000 | Delta 6000 | Delta Hazer | PF-1000

Fog Fluids
Fog Fluid | Stage and Studio Fluid | Light Fog Fluid  | Clear Fog Fluid | Delta Haze Fluid

Accessories
Alpha 900 Wireless Remote Control | Coldflow | DMX Interface

Features of the Rosco Alpha 900 Fog Machine: The Alpha 900 is the lowest priced of all Rosco fog machines, but it has a large volume for such a small machine. Weighing less than 12 lb. (5 kg), the Alpha 900 delivers quite a punch for a machine with a 1000 watt heater. The Alpha 900 is operated from a hand held remote attached to a 30 ft. (9 m) cord which has a simple ON/OFF switch. Alternatively, the machine can be operated from an optional Wireless Remote Control that can run the machine from 30 ft. (9 m). Housing will only accommodate the (1) liter size fluid bottle.

Top of Page

Features of the Rosco Model 1700 Fog Machine: The Rosco Model 1700 has a remote control stored on board, with a 5-meter lead and fine control for volume as well as on-board timers. In addition, the Model 1700 can be operated from a lighting control board through an optional DMX interface. Another feature of the Model 1700 is that it can easily be daisy chained, allowing up to 4 machines to be operated from a single remote control.  The fog outlet cowling accepts the standard Rosco hose adaptor and ducting hose system. Like most Rosco fog machines, the Model 1700 can be operated with the Rosco Chiller Module or Rosco Coldflow for low-lying chilled fog. The Model 1700 gives a high burst of fog and then ramps back to give continuous fog at any volume setting with no interruption for a reheat cycle. With few replacement parts this machines proves to be an easy machine to service and maintain.  The Rosco model 1700 accepts either the 4L or 2.5L Rosco Fog Fluid bottle, which makes it accessible to the entire range of Rosco fluids.

Top of Page

Features of the Rosco Model 1900 Fog Machine: Built on the same principles as the Model 1700, the Model 1900 offers control features that today's special effects professionals demand. These include volume control to allow the user to vary the output as well as on/off timers for automatic sequencing. Up to four Model 1900 machines can be operated from a single remote by simply running a standard 3-pin XLR cable from machine to machine. The remote control, standard equipment for the Model 1900, is stored on the machine and comes with a 15 foot cable. An optional DMX control (the same as that used with the Model 1700) is available. The Model 1900 accepts the same standard hose adaptor and ducting hose as all other Rosco machines. But the most unique feature of the Model 1900 is the extremely high output, which is almost twice as much as the Model 1700. With an initial high burst of fog the Model 1900 will fill the largest venues with fog in a very short time. After the initial burst, the Model 1900 will scale back the fog to operate continuously without interruption for a reheat cycle. The Model 1900 is equipped with an electronic thermostat, a cast aluminum heat exchanger, and a piston pump, all for easy serviceability. In addition the heat exchanger has a resettable thermal trip for safety. The machine will hold a 4-liter bottle of fluid and is compatible with all standard Rosco fog fluids.

Top of Page

Features of the Rosco Delta 3000 Fog Machine: Using precision designed components coupled with a new electronics design known as Delta Technology™, Rosco's Delta 3000 Fog Machine provides the tools to make fog and smoke a more versatile and creative component for any performance, film or video presentation.  The heat exchanger of the Delta 3000, the heart of any fog machine, is made of cast aluminum housing a robust 1500 watt heater element. The design of the heat exchanger, along with a unique electronic thermostatic control, is the key to creating unparalleled volumes of smoke - volumes large enough to fill most stages in less than a minute.  The other major innovation of the Delta 3000 is the harnessing of the Delta Technology to control the fog effect. This state-of-the-art electronics design allows designers and technicians to use fog and smoke the way they use light or sound: to have the effect start on cue at the correct level and end on cue. The Delta 3000 makes that possible through the choice of three different remote control devices, digital DMX, analog DMX, and solo DMX.

Specifications of the Rosco Delta 3000 Fog Machine:
Power requirements: 120 volts, 50/60 Hz, 14 Amps. 220/240 volts, 50/60 Hz, 7 Amps. Dimensions: 16.5" (Length) x 7" (Height) x 13" (Width) / (42 cm x 17.8 cm x 33 cm). Weight: 18.5 lbs. (8.41 kg). Warm-up time: 5 minutes. Maximum fluid consumption: 6.5 liters per hour. Reservoir: 4 liters. Volume Control: Yes. Air Input: Yes. Timers: Standard. DMX Interface: Standard. Hose Adaptor: 4" (10.2 cm). Ducting Hose: 4" x 25' (10.2 cm x 7.62 m).

Top of Page

Features of the Rosco Delta 6000 Fog Machine: The Rosco Delta 6000 fog machine utilizes a dual path heat exchanger to efficiently create a very large volume of fog. Designed primarily for use on very large stages, theme parks and industrial applications, the Delta 6000 operates from the same sophisticated software as the Delta 3000™ This Delta Technology™ allows the user a variety of controls as standard equipment including: DMX, local volume control, timers, and 0-10 volt signal. The Delta 6000 also comes equipped with a low fluid sensor and an air input port for cleaning.  The Delta 6000 Must be operated with either the Digital/DMX, Analog/DMX, or Timed Remote Control.

Top of Page

Features of the Rosco Delta Hazer: The latest in the growing line of Delta effects machines, the Rosco Delta Hazer represents a new approach to creating atmospheric effects. With a unique water-based fluid, a 1000 watt heat exchanger and a high quality blower, the Delta Hazer can quickly create enough haze for any size venue. By turning just one knob, the fan and pump speed are varied for optimum output and, even at high speeds, the machine will run continuously.

Using the award winning Delta Technology™, the Delta Hazer has a variety of features not seen in other machines including: on-board DMX, low fluid sensor and auto timers. More importantly, the Delta Hazer has a new continuous self cleaning feature that insures long life. Like the rest of the Delta line, the Delta Hazer is easy to service and holds a large 4-liter bottle of Delta Haze fluid. Delta Hazer ONLY works with Rosco Delta Haze Fluid.

Top of Page

Features of the Rosco PF-1000: The system consists of a Heat Exchanger Module that is separate from the Control Module and attached with tubing and a special cable. The Heat Exchanger Module is approximately 9 in. (22.9 cm) long and 3 in. (7.5 cm) in diameter. This small size allows it to be affixed in many places a standard fog machine could not be used, such as in props and animated mannequins. The Control Module can be mounted on a wall or placed anywhere remote to the Heat Exchanger Module and fluid reservoir. The Control Module controls fog volume and on/off operation. Regulated compressed air can be introduced through the heat exchanger to add to the creation of punctuated effects, as well as help keep the Heat Exchanger Module clean. This can be regulated with the Air Input Kit. It can also be modified to allow activation through a lighting control board or a main control computer. A 15 ft. (4.6 m) Head Cable links the Heat Exchanger Module with the Control Module. This cable carries power and the data line for the thermal sensing device. A 15 ft. (4.6 m) long, 1/8 nylon tube carries fog fluid from the reservoir through the Control Module to the Heat Exchanger Module. The system uses all standard Rosco Fog Fluids.
 

Top of Page

Safety Data Sheet

Rosco Fog Fluid: Rosco Fog Fluid produces virtually any kind of fog effect easily and continuously. It is ideal for use in theater, film, television, live entertainment and special events. Developed 20 years ago, this fluid is an original formulation, created as an alternative to potentially hazardous petroleum based fluids. The development of Rosco Fog Fluid was considered so innovative it won an Academy Award for this technical achievement. Created for use in the extensive array of Rosco fog machines, Rosco Fog Fluid can produce a wide range of effects - anything from a heavy cloud to light wisps. It is designed to provide maximum hang time.

Model	Description	List Price	Our Price
RFL4	Fog Fluid 4 Liter	$59.95
RFL1	Fog Fluid 1 Liter	$16.95

Top of Page

Safety Data Sheet

Rosco Stage & Studio Fluid: Rosco Stage & Studio Fluid was created for those occasions where certain fog effects need to dissipate quickly or to create low-lying effects . Used with all Rosco fog machines, it will produce an effective theatrical fog and then disappear The Academy Award winning Rosco Fog Fluid has become the standard of the entertainment industry for fog effects in the performing arts. In many theatrical, film and television presentations, however, these effects are required only at a particular point in the production. Once the effect is completed, it is important that the fog disappears quickly and does not intrude on the action that follows. Used in conjunction with a Rosco fog machine and a Rosco Coldflow, or Rosco Chiller Module the Stage & Studio Fluid generates an excellent low-lying fog effect. Similar to the effect produced by dry ice and hot water, the Rosco chilled fog system is more economical.

Top of Page

Safety Data Sheet

Rosco Light Fog Fluid: Rosco Light Fog Fluid is one of the latest additions to the Rosco line of fog effects. Utilizing the same components as Rosco's other award-winning fluids, this economical water-based fluid delivers exactly what the name says: a lighter fog effect. When combined with compressed air in the Model 1600, PF-1000, or Intelligent Fog System, Rosco Light Fog Fluid can achieve a good haze effect.

Top of Page

Safety Data Sheet

Rosco Clear Fog Fluid: For 20 years Rosco Fog Fluid has been the industry standard with its green color and distinctive scent. Now Rosco offers Rosco Clear Fog Fluid. Rosco Clear delivers the exact same effect as Rosco Fog Fluid, but does not have the colorant or scent additives.

Top of Page

Safety Data Sheet

Top of Page

Features of the Rosco Alpha 900 Wireless Remote: The Wireless Remote Control is designed for use only with the Alpha 900 fog machine. The remote can operate the machine from a distance of 30 ft. (9 m), line of sight. It consists of a transmitter and receiver. The receiver plugs into the remote jack on the machine and has a magnet to attach to the body of the machine. The transmitter is small and compact.

Top of Page

Features of the Rosco Coldflow: The Rosco Coldflow is an accessory for standard fog machines that converts liquid carbon dioxide (LCO2) to dry ice. The dry ice cools a uniquely designed aluminum extrusion that is capable of converting large volumes of fog into dense low lying fog. The unit can create a wide range of low lying fog effects from a continuous layer to a gigantic cloudburst. By using LCO2, the Coldflow is far more efficient than more conventional means for creating a low-lying fog. The unit actually uses the LCO2 to create dry ice inside an aluminum chamber. You then can use your Rosco Model 1600 (or just about any other Rosco fog machine), and run the fog through the cooling chamber. The fog is chilled below ambient temperature and will hug the ground. It is well known that the cooler the fog, the better the effect. That's why, by exposing the fog to the low temperature of dry ice, you can get a great effect. Coldflow eliminates all of the problems associated with using commercial dry ice. These problems included finding a source, transporting, handling, storage and the need to limit fog to short effects. Liquid carbon dioxide is commonly found almost anywhere. It is easy to handle and does not require any special storage. Whereas 50 pounds of dry ice will give a 15-minute effect when dropped in hot water, a comparable tank of LCO2 will last for hours. Best results will be achieved when the Rosco Coldflow used with any Rosco fog machine plus Rosco Stage & Studio Fog Fluid. Stage & Studio is specifically designed to help create fog that will lie lower and accept the lower temperatures and other changes created by the Coldflow. A remote included as standard equipment activates Coldflow. The remote has three easy-to-read LEDs. One of these indicators is for ON/OFF, the second illuminates while the unit is cooling (about ten minutes) and a third tells you when Coldflow is ready for operation. Attached to the unit is a 7' metal hose for connection from the Coldflow to a LCO2 tank.
 

Top of Page

Features of the Rosco DMX Interface: The Rosco DMX Interface has been designed to control most of the range of standard Rosco fog machines through the industry standard DMX lighting control consoles. The interface will allow a preset volume control of the 4500 and the PF-1000 Remote Head Fogger (not all indicator lights will function) and the older Model 1500. The DMX Interface draws its power directly from the fog machine in the same manner as the Standard Remote or Super Remote. Connection to the machine is made via a 7 pin XLR type connector that is attached to the unit and is plugged in to the same input on the machine as any of the standard control accessories. The unit is addressable to any DMX channel via (8 way) dip switch settings using the binary code system. There is a second set of dip switches (5 way) that can be used to preset the machine output. The DMX Interface accepts standard 5-pin XLR DMX connectors.

Nearest Product Category  |  Other ROSCO pages  |  Sales Home Page

Top of Page